Multifunction receiver
€189.85
Including €0.10 for ecotax
Control your home with a Din Rail receiver,
This multifunction Din Rail module will fit directly into your electrical panel. These main functions are :
- Start/Stop, Pulse and Open/Stop/Close.
- Mode of use: lighting, shutter, gate/door opener (strike)/garage door...
- 4 outputs and 4 inputs
- Range (free field): 100 m
- Operating temperature: -5°C +45°C
- Timer function: 1 sec to 24 hours
- Start/Stop, Pulse and Open/Stop/Close.
- Mode of use: lighting, shutter, gate/door opener (strike)/garage door...
- 4 outputs and 4 inputs
- Range (free field): 100 m
- Operating temperature: -5°C +45°C
- Timer function: 1 sec to 24 hours
| Warranty | 2 years |
|---|---|
| Colour | Grey |
| Power (W) | 2000 W |
| Connection | Wired |
| Amperage (A) | 10 A |
| Protection rating | IP20 |
| Use | Inside only |
| Type of solution | Receiver |
| Type of control | On/Off |
| Max number of transmitters | 32 |
| Transmission range | 150 m |
| Remote-control included | Non |
| Attachment | Wall-mounted |
| Voltage | 230 V |
| Radio protocol | edisio |
| Radio frequency | 868 MHz |
| Status feedback | Yes |
| Signal repeater (meshing) | Yes |
| Contents | 1 récepteur 4 sorties |
Multifunction
The advantage of this module is that you can give different functions to several devices at the same time.
For example, output 1 can be in On / Off mode to turn your light on or off, output 2 can be in pulse mode independently of their timers, and outputs 3 and 4 can be in open/stop/close mode to control your shutters.
Total control
Thanks to our EGW-lite gateway, you can control your home remotely and create customised scenarios to suit each situation.
And for even more convenience, all of this is connected to your iPhone, iPad, smartphone, computer, Android, etc.