Dimmer microreceiver - with Neutral
€91.27
Including €0.05 for ecotax
Vary the brightness of your lighting according to your needs.
The EMSD-300 silent radio micromodule can be placed in the flush-mounted box or in false ceilings and can also be connected to your existing switches.
- Silent two-way micromodule
- Installation on existing switch
- On/Off/Dimmer control
- Timer 15 min - 60 min
- Compatible with all types of lighting
- Controls the brightness of dimmable lights
- Storage of the last selected light intensity
- Gradual switch-on and switch-off function of the lighting system
- 4 pre-wired wires (phase-to-neutral connection)
- Range (free field): 100 m
- Power supply: 230 V 50/60 Hz
- Not compatible with all dimmable LEDs
- Silent two-way micromodule
- Installation on existing switch
- On/Off/Dimmer control
- Timer 15 min - 60 min
- Compatible with all types of lighting
- Controls the brightness of dimmable lights
- Storage of the last selected light intensity
- Gradual switch-on and switch-off function of the lighting system
- 4 pre-wired wires (phase-to-neutral connection)
- Range (free field): 100 m
- Power supply: 230 V 50/60 Hz
- Not compatible with all dimmable LEDs
| Warranty | 2 years |
|---|---|
| Colour | White |
| Power (W) | 300 W |
| Connection | Wired |
| Protection rating | IP20 |
| Use | Inside only |
| Type of solution | Receiver |
| Type of control | On/Off + Dimmer |
| Max number of transmitters | 32 |
| Transmission range | 150 m |
| Remote-control included | Non |
| Attachment | Flush-mounted |
| Voltage | 230 V |
| Radio protocol | edisio |
| Radio frequency | 868 MHz |
| Status feedback | No |
| Signal repeater (meshing) | Yes |
| Contents | 1 récepteur |
Adapt your lighting to your needs
This lighting dimmer allows you to create lighting atmospheres without touching the electrical installation. This module makes it possible to brighten or dim a lighting system according to your needs. You can also control your lamp remotely with your smartphone or tablet by associating the module with the DiOHome+ Box in an automatic, individual, centralised or grouped configuration.
Via the application, you can create life scenarios so that your light is gradually switched on when you wake up, or off at a certain time.
Easy to install
Small and quiet, it can be easily installed in the flush-mounted box or in false ceilings, it can be quickly associated with transmitters, and has an input to connect to your existing switches. It allows on/off control of all types of lighting. You can also control the brightness of your dimmable lights. It remembers the last brightness level you chose.