Motion and brightness sensor
  • Motion and brightness sensor

Motion sensor


Including €0.12 for ecotax

Be immediately notified if motion is detected or if there is a change in temperature.
  • EMS-100
  • EMS-100
 In stock

This occupancy detector must be associated with other modules so that it can act according to the detection.

- On/Off
- Open/Close
- Possible scenarios
- Time delay from 30 min. to 1 hour
- Delivered with stand
- Detection in the dark - Brightness sensor
- Compact and discreet
- Frequency: 868.3 MHz
- Battery: 3 V DC - Lithium ER14250
- Range (free field): 100 m
- Motion detection range: 6 m
- Battery life: 3 years
Warranty 2 years
Colour White
Connection Wireless
Protection rating IP20
Use Inside only
Type of solution Transmitter
Type of control On/Off
Max number of transmitters 32
Transmission range 150 m
Remote-control included Non
Attachment On furniture / Wall-mounted
Radio protocol edisio
Radio frequency 868 MHz
Status feedback No
Signal repeater (meshing) No
Contents 1 catpteur + accessoires

Discreet, stylish and wireless

It is small and discreet, so you can install it anywhere, and it will easily blend in with your interior decoration. It has a passive infrared sensor that detects temperature variations as well as movements, allowing it to act accordingly and switch on the light automatically if it starts to get dark. To do this, you need to connect this detector to the light module, shutter module, etc.

Improves safety and your comfort

The occupancy detector has a passive infrared sensor that detects temperature variations of less than 4° as well as movements. Thanks to its wide viewing angle and range, it secures a wide perimeter.

You can associate it with other modules so that it can automatically control the switching on or off of your lights, the closing or opening of your shutters, or the triggering of scenarios that you have previously programmed, etc. For example, if it gets darker, your shutters close and your light turns on.