- Promotion
Extra-flat built-in micromodule - wireless
€36.90
Tax included
Including €0.21 for contribution
Make your existing switches intelligent enough to control any automation and light fittings.
This module allows you to associate any switch with our receivers so that you can keep your switch without changing your interior design.
- Control 1 or 2 groups of lights or doors/windows
- On/ Off / Dimmer
- Open/Stop/Close
- Ability to create scenarios while keeping your switch
- Dimming the lighting from an existing bistable switch
- Two-way micromodule
- Range (free field): 100 m
- Battery operated
- 3 pre-wired wires
- Battery life: 2 years
| Warranty | 2 years |
|---|---|
| Use | Indoor only |
| Degree of protection | IP20 |
| Color | White |
| Voltage | 3V |
| Connection | Wireless |
| Battery 1 - Type | CR2432 3V |
| Type of solution | Emetteur |
| Type of control | On/Off + Dimmer |
| Wireless protocol | edisio |
| Radio frequency | 868 MHz |
| Transmission range | |
| Remote control included | Non |
| Number of transmitters max. | 32 |
| Return of status | No |
| Mounting | Flush-mounted |
| Signal repeater (meshing) | No |
| Content | 1 transmitter |
Quick and easy to install
This extra-flat recessed micromodule allows any existing switch to be associated with an Edisio receiver. You will keep your existing switches while benefiting from Edisio's wireless technology.
With your existing switches, you will be able to control your lights; either turn them on or off, and also change the brightness of your lighting. Other automations such as roller shutters, garage doors or gates can also be controlled (Open/Stop/Close).
Custom Scenarios
Your switches, once they have become intelligent, can be programmed so that you can adapt your lighting and automation to suit your needs.
With this module you can, for example:
1 "Start" button to switch off the lights, the shutters closed
on 1 button "Arrival" the lights are switched on, the shutters open