• Promotion

Boiler module with status feedback

Tax included

Including €0.15 for contribution

  • ED-TH-02
 In stock
  • ED-TH-02
 In stock


Connected to the DiO HomeBox, this module lets you control your heating remotely and schedule your programs quickly and easily.

Thanks to the status feedback feature, you know the status of your heating at any time (on/off/temperature).


One module for boiler or electric radiator with status feedback, mounting screws and wall plugs


Connect the module to the thermostat input of your boiler and connect it to the temperature probe via your DiO HomeBox. Thanks to the DiO Home app, adjust the temperature of your smart home, wherever you are.

Warranty 2 years
Use Indoor only
Degree of protection IP20
Color White
Connection Wireless
Type of solution Récepteur
Wireless protocol DiO 2.0
Transmission range
Number of transmitters max. 32
Smartphone control No
Return of status Yes
Heating compatibility Central heating and electric heating
Content 1 module for boiler or electric radiator with feedback, screws and dowels

Manuels d'utilisation


Easy to install

You just need a few minutes to install this smart Heating solution.

Here you can see the connections of the module used in the complete installation of your DiO connected heating solution, from connecting the peripherals to using it via smartphone, and including installation on the getdio.me interface:

DiO 2.0 – the enhanced performance solution

The main benefit of DiO 2.0 products is their long free-field radio transmission distance of up to 150 m, so they can operate throughout the house.

In addition, they are ideal for checking the status of your devices through your smartphone using status feedback, so you can check if your lights are turned on or off, your shutters open or closed, your heating switched on, etc.

Lastly, DiO 2.0 modules and sockets have advanced options such as the signal repeater, doubling the transmission distance.

DiO 1.0 and DiO 2.0 products do not operate on the same radio frequency and are therefore not compatible. However, you can use them together through the smart home system, which will link them and enable you to use a DiO 1.0 remote control to turn on a lamp connected to a DiO 2.0 module, for example.