DIO 2.0 wireless smiley button

€27.90

Including €0.12 for ecotax

  • ED-RC-01
  • ED-RC-01
 In stock

Thanks to its small keychain format, you can easily control your lighting or roller shutters from anywhere.

Connected to the DiO HomeBox, the remote control lets you control your smart home: scenarios as well as lighting, shutters or connected heating from your sofa or anywhere else in the house.

For example, using the remote control from your bed, you enable your Wake-up scenario: your lights come on gradually whilst your shutters open and the heating comes on in the necessary rooms.

CONTENTS

ED-RC-01: One smiley switch, one CR2032 3-V battery
ED-RC-02: One 2- or 4-channel remote control , one 3-V CR2032 battery
INSTALLATION

Connect the remote control to the DiO HomeBox to control life scenarios or all of your Connected DiO accessories (1.0 or 2.0)

or

Connect remote control directly to your DiO 2.0 accessories to control them locally, one by one or centrally.
Warranty 2 years
Colour Blue
Connection Wireless
Protection rating IP64
Power supply type Battery/ies
Use Inside only
Type of solution Transmitter
Type of control On/Off + Dimmer
Transmission range 150 m
Battery 1 - Type Lithium CR2032 3 V
Battery 1 - Number 1
Battery 1 - Supplied Included
Number of channels 1
Lifespan (normal use) 24 months
Radio protocol DiO 2.0
Radio frequency 868 MHz
Smartphone-controllable No
Contents One switch, one CR2032 3-V battery

DiO 2.0 – the enhanced performance solution

The main benefit of DiO 2.0 products is their long free-field radio transmission distance of up to 150 m, so they can operate throughout the house.

In addition, they are ideal for checking the status of your devices through your smartphone using status feedback, so you can check if your lights are turned on or off, your shutters open or closed, your heating switched on, etc.

Lastly, DiO 2.0 modules and sockets have advanced options such as the signal repeater, doubling the transmission distance.

DiO 1.0 and DiO 2.0 products do not operate on the same radio frequency and are therefore not compatible. However, you can use them together through the smart home system, which will link them and enable you to use a DiO 1.0 remote control to turn on a lamp connected to a DiO 2.0 module, for example.

Manuels d'utilisation

Declarations