DiO 3-channel remote control
Including €0.12 for ecotax
Control your lamps, power-assisted systems or electrical devices anywhere in your home.
Ultra-flat three-channel remote control with a group function to control your lamps, shutters, or electrical devices connected to a DiO 1.0 receiver (lighting module, drive module, DiO sockets or bulbs).
- Number of channels: 3
- Dimmer function: vary the brightness of the light
- 100% compatible with the DiO by Chacon range.
- Transmission range: 50 m
- The radiofrequency signal passes through walls and partitions to control lamps and appliances throughout the house.
- Contents: One three-channel remote control and one group channel, one 3-V CR2032 battery
|Use||Indoor or Outdoor|
|Battery 1 - Type||Lithium CR2032|
|Battery 1 - Number||1|
|Battery 1 - Provided||Included|
|Wireless protocol||DiO 1.0|
|Radio frequency||433,92 MHz|
|Number of channels||3 + 1|
- 54860 User Manual 200717.pdf Télécharger
Adapt home automation to your needs!
This remote control allows you to turn on and off a lamp but also to vary the intensity of your lights. For more comfort, the remote control has a "grouped" function, to control centrally all the accessories installed on channels 1 to 3.
You can also link the remote control to the DiO home automation system (HomeBox or DiO Home+) and create personalized living scenarios.
You've always dreamed of controlling your electrical appliances from your bed or sofa, without having to move. You can do this, for example, by activating the "Wake up" scenario: the lights turn on progressively, your shutters open, and the heating in your bathroom turns on.
Your comfort in just one click
The remote control is 100% compatible with the DiO 1.0 range, so you can add as many devices as you want and improve your daily life. You can also adjust the intensity of your light with the dimmer function on the remote control, for a subdued atmosphere.
Control your light in less than 5 minutes.
You no longer have to get up from your bed or chair to flip the switch. A simple click on your remote control, and you control the brightness of your ceiling light.
The installation is wireless and takes less than 5 minutes. Thanks to the 433MHz frequency, you just have to bring the remote control close to the DiO receiver, and proceed to the connection to control your devices locally.