

Signal amplifier
Double the transmission range between your DiO 1.0 accessories
This wireless relay increases the wireless transmission signal between your DiO receivers and remote controls. Ideal, for example, to control a receiver located at the bottom of the garden.
- 100% Compatible with the DiO 1.0 range
- Easy to install, wireless, takes just a few minutes
- Doubles the transmission range: 2 x 50 m
- Automatic learning mode
- IP56: suitable for outdoor use
- Can be connected to as many as six DiO controls
- The radiofrequency signal passes through walls and partitions to control lamps and devices in neighbouring rooms or outside.

Technical details
Warranty | 2 years |
---|---|
UE | 4 |
Transmission range | 50m |
Radio frequency | 433,92 MHz by DiO |
Wireless protocol | DiO 1.0 |
Type of supply | Battery(s) |
Battery 1 - Type | AA 1,5V |
Battery 1 - Number | 2 |
Battery 1 - Provided | Not included |
Connection | Wireless |
Degree of protection | IP44 |
Use | Indoor or Outdoor |
Color | Grey |
More informations
For even more convenience...
Don't be restricted to 50 m; double the signal transmission. Place the amplifier at the other end of your house and turn on your coffee machine, your small bathroom heater, open your living room shutters of your living room... From one floor to another or from your home to the garden, you can control all the electrical appliances and lights that are DiO 1.0 connected, without any distance limit.
Easy to install and use
The most difficult part will be to find a location for it. As far as installation is concerned, nothing very complicated. You must insert its battery (batteries not included) and place it in a corner, on your sideboard or even in your garden to control your outdoor lights or devices, since it is perfectly waterproof.